Four guidelines that must be paid attention to when processing plastic bottle cap molds

Plastic bottle cap mold is a combined plastic bottle cap mold used for compression molding, extrusion molding, injection molding, blow molding and low foam molding. A die with a variable cavity composed of plates, a punch with a variable core composed of a punch combined base plate, a punch assembly, a punch combined clamping plate, a cavity cut-off component and a side section combined plate. Coordinated change of mold convex, concave mold and auxiliary molding systems. A series of plastic parts of different shapes and sizes can be processed.

There are many problems encountered in the production process of large-scale machinery, some of which are just minor problems, we only need to repair them at the right time, and they can continue to be put into use, but there are four points that must be paid attention to when processing plastic bottle cap molds guidelines.

1. It is not allowed to have a lot of water in the mold processing of the bottle cap mold

The reason why it is not allowed here is because if there is too much water in the mold during processing, there will be no way to supervise the work.

2. Don't touch the wires;

3. The temperature is too high

This is to resolutely not allow excessive temperature to cause not only product problems, but also human safety problems.

4. The bottle cap mold was produced without reading the instructions

Not all plastic bottle cap molds are the same, we have to use them separately.

When processing plastic bottle cap molds, these four principles must not be violated, otherwise your own safety will be endangered.